. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING REMARK Check the O-rings in the plugs for damage. If with new ones. visually. If there is any abnormality in the exhaust gas color, contact your 4 - 78 EVERY 2000 HOURS MAINTEN Maintenance for e very 10, 100, 250, 5 00, and 1000 ho urs of servic e shoul d be performed a t the same ti The parts and oil are at high temperature immediately afte r the engine is stopped , and may cause se rious burns. Wait fo r the temperature to g o down before starting t he operation. If there is still pr essure remaining inside the case, the oil or plug may fly Loosen the plug slowly to release the pr Refill capacity:
Each 20 liters (5.28 Prepare a han 1. 2. 1. Set the TOP mark at the top, with t he TOP mark a nd plu g (P) perpendicular to the ground surfac e. handle and drain the oil. 2. Remove plug s (P) and (F) with the handle and dra in the o il. age. If necessa ry, replace 3. Tighten plug ( P). h the hole of plug (F). 4. Add oil throug h the hole of plug (F) 5. When the oil o verflows from the hol e of plug (F), inst all plug (F) Tightening tor que of plugs (P) and (F) : 8.7 - 90.4 lbft) 93.1 - 122.5 N m (9.5 - 12.5 kgm, 6 CHECK INJECT Check the color Komatsu distribut For details, see " TROUBLES AND AC 3-150)" "Exhaust col or is black".