Komatsu — EVERY 2000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING of the 4 - 79 After the engine is s topped, t he part s and oil are at hig h temperature, so ther e is danger of burns. Wa it for the temperature to g o down before startin g the operation. When th e cap of the oil filler port is removed, oil may s purt out, s o turn i t slowly to release the interna l pressure, then remove it carefu When re moving cover ( 1), the cover may fly o ff under the f orce of sprin g (2), so loosen the 4 bolts sl 1. Remo ve the cap from oil filler ( F) on to p of the hydraulic 2. Remo ve cover ( 1) and li ft up t fro take o ut spring ( 2) and s traine 3. Remo ve any dir t stuck t hen was oil.

If s trainer (4) is damaged, r eplace i t with a new part. 4. When installing, check th at the O-ring a t the bottom of st (4) is not out of place or twisted, then coat the surface O-ring with grease, insert it on t o tank pr otrusion (5), and i 5. Install cover (1) wit h bolt