Komatsu — EVERY 2000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CLEAN ENGINE BREATHER WARNING have of grease, so contact your Komatsu distributor for inspection every 1000 hours or every 6 months, whichever comes 4 - 80 The pa rts and oil are at hi gh temperature after t he engine i s stopped, and may cause serious bur ns. Wait for the temperature to go d own before cleanin g the engine breather When using compressed air, there is a hazard t hat dirt ma y be blown up and cause serious injur Always use safety glasse s, dust mask, or other protective equipment. 1. Wipe away dust arou nd the breather. ther in diesel oil or flushing oil. Dry wit install it. 2. Remove breather (1). 3.

Rins e the whole brea compressed air, then 4. Replace O-ring with n ew one. Coat a ne w O-ring with engin oil, s et it, then install breather (1). flushing o il. Dry wit CLEAN, CHECK TURB Contact your Komatsu di stributor for cleanin g or inspection. CHECK ALTERNATOR, STARTING MOTOR The inspectio When th e engine is frequ ently started, ask f sooner. run out every 1000 CHECK ENGINE VALVE CLEARANCE, ADJUST Special t ools are needed for inspection and maintenance, so contact your Komatsu dist