Komatsu — EVERY 4000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE EVERY 4000 HOURS MAINTENANCE CHECK WATER PUMP CHECK VIBRATION DAMPER CHECK FAN PULLEY AND TENSION PULLEY CHECK FOR LOOSENESS OF HIGH-PRESSURE PIPING CLAMP, HARDENING OF RUBBER 4 - 81 Maintenan ce for every 10, 100, 250, 500 , 1000, and 2000 hours of service should be performed a t th e same time. Check if th ere is oil leakag e, water l eakage, or c logging of the drain hole. If any abnormality is found, contact your Komatsu d istributor fo r disassembly and repair or replacement. There may be leakage from the damper, dents, o r face runout, so contact yo ur Komatsu distributor for r eplacement. Inspect th e pulle y for p lay and greas e leakage.

If any fault is detected , ask Komatsu distributor to disassemble and repair or replace. lamp bolts below. Ch eck visually and feel with your finger t o check that t he rubber ha s not hardened. If there is any problem, the proble m part must be r eplaced. Contact you r Komatsu distributor for p art replacement