. OPERATION DETAILED CONTROLS AND GAUGES Machine Push-up Switch WARNING Room Lamp Switch 3 - 31 When using the boom thr ust force to push up the chassi s whe n moving down from a bench, there is danger that the machi ne may suddenly go down and t urn over, so set to the high-pressure This switch (7) is used to switch the safety valve se t pressure at t he head end of the boom cylinder to two levels . (a) Low pressure setti ng: orce is weak, so swaying of the chassis is The boom thrust f chassis small during diggin g operations, and digging c an be performed smoothly. This is used for ge neral digging operations on normal ground, soft rock, or blaste d rock. ng:
(b) High pressure setti The boom thrust fo rce becomes more powerfu l, so i t is easy to twist and swing or escape from soft ground. It is effective in operations using the bucket and weight of fined areas. effective in performing digging of the machine in con Horn Switch When the switch (8) a t the tip of the right work eq uipment control lever is pressed, the h orn will sound. NOTICE It is possible to turn on the interior cab room lamp e It is switch is in the OFF posi tion, do not forget to tur n it off hen starting Switch (9) is used to t urn on the interior cab room lamp (a) ON position: Lights up s out (b) OFF position: Goe It will also light up eve n when the engine is not ru nning