Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES Swing Lock Switch WARNING 3 - 30 W hen the mac hine is traveling under its own p ower, or when the swing is not being op erated, always set the switch to the ON position (a). O n slopes, eve n when the swing lock switch is a t the ON position (a), the w if eight of the work equipment may cause the u pper structure to swing the swing co ntrol lever is operated in the do wnhill direction. Switch (4) is us ed to lock the upper structur e so it cannot swing. (a) ON position (actuated) : The swing lock i s always applied, and the upper structu if the swing i condition, the s up. re will not swing even s operated.

In this wing lock lamp lights (b) OFF position (canceled) : The swing lock is applied only when all the work eq are in neutr equipment con the swing lock The swing lock seconds after are placed in t uipment control levers al; when any work trol lever is operated, is canceled. is actuated approx. 5 all the control levers he neutral position. Lamp Switch Switch (5) is u sed to turn on the front lamps, working lamps, additional lamp s at top front of the cab, and (a) ON: Lamps (b) OFF: Lamps Alarm Buzzer St op Switch is used (when the engine is running) to stop the This switch (6) alar hen it has sounded to warn of a problem in a REMARK This switch is a n automatic reset type.

If the STOP position (b) is pressed, the a larm buzzer stops and the ginal position. switch automatically returns to its ori