Komatsu — WINDSHIELD WIPERS

Operation - Section 32 1/10 OM3234 Page 32-6 Operator Cab and Controls OVERHEAD PANEL CONTROLS AND COMPONENTS RADIO SPEAKERS Radio speakers (9, Figure 32-1) for the cab radio are located at the far left and right of the overhead panel. GRADE/SPEED WARNING CHART Grade/Speed Warning chart (Figure 32-6) provides the recommended maximum truck speeds for descending various grades with a loaded truck. WARNING ALARM BUZZER Warning alarm buzzer (10, Figure 32-1) will sound when activated by any one of several truck functions. Refer to Instrument Panel in this module for a detailed description of the functions and indicators that will activate this alarm.

CAB RADIO This panel will normally contain AM/FM radio (11, Figure 32-1). Refer to Section 70 for a complete description of the radio and its functions. Individual customers may use this area for other purposes, such as a two-way communications radio. WARNING LIGHTS DIMMER CONTROL Warning lights dimmer control (12, Figure 32-1) permits the operator to adjust the brightness of the warning indi- cator lights. This control may not be on all model trucks. WARNING/STATUS INDICATOR LIGHT PANEL Warning/status indicator light panel (13, Figure 32-1) contains an array of indicator lights to provide the operator with important status messages concerning selected truck functions.

Refer to Overhead Status/ Warning Indicator Light Panel in this module for a detailed description of these indicators. FIGURE 32-6. GRADE/SPEED WARNING CHART The operator must refer to the grade/speed warning chart before descending any grade with a loaded truck. Proper use of dynamic retarding will maintain a safe speed. AIR CLEANER VACUUM GAUGES Air cleaner vacuum gauges (14, Figure 32-1) provide a continuous reading of maximum air cleaner restriction reached during opera- tion. The air cleaner(s) must be serviced when the gauge(s) dis- play 6.2 kPa (25 in.) of H 2 0 vac- uum . DO NOT exceed the recommended maximum speed when descending a grade with a loaded truck.

This decal may change with optional truck equipment such as: wheel motor drive train ratios, retarder grids, tire sizes, etc. NOTE: After service, push the reset button on the face of the gauge to allow the gauge to return to zero. WINDSHIELD WIPERS Windshield wipers (15, Figure 32-1) are powered by an electric motor. Refer to Multi-Function Turn Signal Switch in this module for a location and description of the windshield wiper and washer controls.