OM3234 1/10 Operation - Section 32 Operator Cab and Controls Page 32-5 Fan Control Knob Heater/Air Conditioner Vents Fan control knob (4, Figure 32-5) controls the 3-speed heater/air conditioner internal fan unit. Full counter- clockwise is the off position. Rotating the knob clock- wise selects increasingly higher fan speeds. Heater/air conditioner vents (6, Figure 32-5) may be rotated 360°. Air flow through the vents is controlled by manually opening/closing, or turning the louvers. Heater/Air Conditioner Selector Switch Heater/air conditioner selector switch (5, Figure 32-5) allows the operator to select heat, A/C, or neither.
The left position of the switch activates the air conditioning, and the right side of the switch activates the heater. The middle position is off (no heat or air conditioning). NOTE: The air conditioner will not operate unless the fan control knob is turned on. FIGURE 32-5. A/C AND HEATER CONTROLS 1. Defroster Vent Control Switch 2. Heat Control Switch 3. Temperature Control Knob 4. Fan Control Knob 5. Heater/Air Conditioner Selector Switch 6. Heater/Air Conditioner Vents