Appendix A User Settings and Factory Settings The factory settings require a password to change. “Unlocking” the Hot Keys This is a popular way to expand the use of the i5601E. To unlock the hot keys and allow for additional data selections go to the Main menu, as described on page 18. Then select HOT KEYS. Exit the menu back to the normal operating screens. You will see a right hand arrow above key 5 when any key is pressed. The Right Arrow button changes the menu to allow selection of each block. Pressing a block key will cycle through the choices listed on the next page. The choices are presented in alphabetical order.
Bold items are the default settings and will appear initially unless replaced by another listed item. Example using a quad screen: 1 2 3 4 5 Hot Keys 1 2 3 4 5 Block Keys Each button cycles the related block through the list on the next page. Note: Data in NMEA 2000 ® format may be added to the CANBus system from a compatible device which feeds the optional parameters listed above. The i5601E display has the capability of displaying additional information as other devices with NMEA 2000 ® communication capabilities are added to the vessel. Electronic Control System: Operation Manual for BY Series Engines with Unlimited Controls Page 20 © Yanmar 2008