Komatsu — PANEL GAUGES, INDICATORS, AND CONTROLS (Figure 3-11)

Operation - Section 3 OM3214 Page 32-16 Operator Cab and Controls (27, Figure 32-11) LIGHT SWITCH The instrument panel lights, clearance lights, and the head- lights are controlled by this three position rocker type switch. OFF is selected by pressing the bot- tom of the switch. Press the top of the switch until it reaches the first detent to select the panel, clearance, and tail lights only. Press the top of the switch again, until it reaches the second detent to select headlights, as well as panel, clear- ance, and tail lights.

(28, Figure 32-11) PANEL LIGHT DIMMER The panel light dimmer control is a rheostat which allows the oper- ator to vary the brightness of the instruments and panel lights. Rotating knob to the full counter- clockwise position turns panel lights ON to brightest condition. Rotating knob clockwise continually dims lights until OFF position is reached at full clockwise rotation. (29, Figure 32-11) PAYLOAD METER SWITCH The Payload Meter Switch is a two-way, momentary switch. The top position is the Select position. The Select position is used to step through the different displays. The lower position is the SET position.

The SET posi- tion is used to set the Operator ID or clear the load and total ton counters. Refer to Section 6, Optional Equipment, for a more complete description of the Payload Meter System and its functions.