UPPERSTRUCTURE / Swing Device 4. Put the matching marks onto reduction gear (10) and main frame (3). Remove bolts (12) (14 used) and spacers (11) (14 used). : 36 mm 5. Remove corks (14) (2 used) from reduction gear (10). 4 3 CAUTION: Swing device weight 470 kg (1040 lb) 6. Install the bolts (M24, Pitch 3.0 mm) to the hole where cork (14) is removed. 10 : 36 mm 7. Turn the pulling-out bolt and float the swing device from main frame (3). Wind the body of swing motor (4) by using a nylon sling. Hoist and remove the swing device from main frame (3). 11 12 11 13 10 14 W800-02-06-005 8. Remove another swing device in the same procedures as steps 4 to 7. W2-6-2