hitachi — REMOVE AND INSTALL SWING DEVICE

UPPERSTRUCTURE / Swing Device Installation 1. Apply liquid packing onto the both mounting surfaces on reduction gear (10) and main frame (3). CAUTION: Swing device weight: 470 kg (1040 lb) 2. Align the matching marks made when disassembling. Align the knock pin (13) position on the swing device and lower the swing device onto the mounting surface for main frame (3). Tap and install knock pins (13) (2 used). 3. Install the swing device to main frame (3) with spacers (11) (14 used) and bolts (12) (14 used). Install new corks (14) (2 used) into the pulling-out hole. : 36 mm : 950 N m (97 kgf m, 700 lbf ft) 4. Install another swing device in the same procedures as steps 1 to 3. 5.

Install hoses (5) (3 used), (7) (2 used). : 19 mm : 29.5 N m (3 kgf m, 22 lbf ft) : 27 mm : 78 N m (8 kgf m, 58 lbf ft) : 205 N m (21 kgf m, 150 lbf ft) 6. Install hoses (6) (4 used) to swing motor (4) with socket bolts (8) (16 used) and split flanges (9) (8 used). : 41 mm 2 1 3 : 8 mm : 50 N m (5 kgf m, 36 lbf ft) 7. Install cover (1) to main frame (3) with bolts (2) (7 used). : 19 mm : 90 N m (9 kgf m, 66 lbf ft) W800-02-06-004 W2-6-3 4 5 6 7 6 8、9 3 10 12 14 13 11 12 8, 9 5 11 W800-02-06-005 8、9 14 5 6 7 6