UPPERSTRUCTURE / Fan Motor REMOVE AND INSTALL FAN MOTOR CAUTION: Release any pressure in the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) Removal of Fan Motor for Oil Cooler 1. Remove bolts (1) (4 used) and washers (2) (4 used). Remove handrail (5) from shroud (12). : 19 mm 2. Remove bolts (3) (6 used) and washers (4) (6 used). Remove cover (7) from shroud (12). 1, 2 5 6 1, 2 3, 4 7 8 : 19 mm 3. Remove bolt (8). Open the upper cover on box (10). Remove vinyl hose (9) from water tank (13). 9 10, 11 : 17 mm 4. Raise vinyl hose (6). Disconnect the connector from the lower of box (10). 5. Remove bolts (11) (5 used).
Remove the box (10) assembly from shroud (12). 12 W1JB-02-12-003 13 12 : 17 mm 6. Remove bolts (16) (6 used). Remove cover (15) from main frame (14). : 19 mm 14 15 W1JB-02-13-005 16 W2-12-1