hitachi — REMOVE AND INSTALL ENGINE

UPPERSTRUCTURE / Engine CAUTION: Support (49) weight: 21 kg (46 lb) 34. Attach a nylon sling to support (49). Hoist and align support (49) with the mounting holes on supports (53, 58). Install support (49) to supports (53, 58) with sems bolts (59) (4 used). : 19 mm : 90 N m (9 kgf m, 66 lbf ft) W1JB-02-14-002 CAUTION: Beam (35) weight: 22 kg (49 lb) 35. Attach a nylon sling to beam (35) and hoist beam (35). Align beam (35) with the mounting hole on supports (47, 49). Install beam (35) to supports (47, 49) with sems bolts (48) (6 used). : 19 mm : 90 N m (9 kgf m, 66 lbf ft) 36. Install support (54), stay (55) and cover (56). (Refer to the Remove and Install Pump Device group on W2-4-1.) 37.

Install duct (39) to support (47) with bolts (37) (4 used) and washers (38) (4 used). 55 56 W1JB-02-14-002 39, 40 : 19 mm : 90 N m (9 kgf m, 66 lbf ft) 38. Install covers (36) (2 used) to support (47) with sems bolts (39) (8 used) and washers (40) (8 used). : 19 mm : 90 N m (9 kgf m, 66 lbf ft) 36 39, 40 W1JB-02-12-007 W2-14-19 35 49 53 48 47 59 58 35 49 53 47 54 39 37, 38 36