hitachi — REMOVE AND INSTALL ENGINE

UPPERSTRUCTURE / Engine CAUTION: Cover (42) weight: 25 kg (55 lb) 39. Attach a nylon sling to cover (42) and hoist cover (42). Align cover (42) with the mounting hole on supports (47, 49). Install cover (42) to supports (47, 49) with sems bolts (41) (8 used). : 19 mm : 90 N m (9 kgf m, 66 lbf ft) 40. Install pre-cleaners (43) (2 used) and covers (44, 45, 46). (Refer to the Remove and Install Pump Device group on W2-4-1.) W1JB-02-14-002 41 42 44 43 35 45 46 W1JB-02-14-001 26 CAUTION: Cover (26) weight: 39 kg (85 lb) 41. Attach a nylon sling to cover (26) and hoist cover (26). Align cover (26) with the mounting hole on beam (35). Install cover (26) to beam (35) with sems bolts (34)(6 used).

A 26 B : 17 mm : 50 N m (5 kgf m, 37 lbf ft) 42. Install shack absorber (29) to the pin part in beam (35). Secure shock absorber (29) to beam (35) with washer (28) and lock pin (30). 43. Install stay (33) to cover (26). Secure cover (26) to stay (33) with washer (31) and lock pin (32). 34 34 35 W1JB-02-14-008 35 28 31 26 29 32 30 33 W1JB-02-14-009 W1JB-02-14-010 Detail for Position A Detail for Position B W2-14-20 47 49