hitachi — ASSEMBLE BRAKE VALVE

UNDERCARRIAGE / Travel Device Assemble Brake Valve 1. Install O-rings (7, 14) to plugs (6, 15) respectively. Install valve assembly (13) and plugs (6, 15) to valve housing (46). : 10 mm : 64 ± 4.9 N m (6.5 ± 0.5 kgf m, 47 ± 3.6 lbf ft) 2. Install O-ring (2) to plug (1). Install check valve (4), spring (3) and plug (1) to valve housing (46). (2 places on both right and left) : 410 ± 20 N m (42 ± 2 kgf m, 300 ± 14.5 lbf ft) IMPORTANT: Install overload relief valve (5) to the former position before disassem- bled. 3. Install overload relief valves (5) (2 used) to valve housing (46). : 14 mm : 36 mm : 410 ± 20 N m (42 ± 2 kgf m, 300 ± 14.5 lbf ft) 4.

Rotate and insert spool assembly (50) slowly into valve housing (46). 5. Install O-ring (37) to cap (36). (2 places on both right and left) 6. Install spring seat (40), spring (39) and spring seat (38) to valve housing (46). Install cap (36) with socket bolts (35) (4 used). (2 places on both right and left) : 10 mm : 108 ± 4.9 N m (11 ± 0.5 kgf m, 80 ± 3.6 lbf ft) W3-2-35