UNDERCARRIAGE / Travel Device MAINTENANCE STANDARD 1. Clearance between inner diameter (D) of cylinder block and outer diameter (d) of piston Cylinder Block (D-d): 0.06 mm (0.002 in) or less d D W507-02-04-009 Piston 2. Clearance between piston and shoe Piston δ : 0.4 mm (0.02 in) or less Shoe δ 3. Clearance between inner diameter (D) and outer diameter (d) at mounting position of case and piston W107-02-06-140 (D-d): 0.03 mm (0.001 in) or less Case 4. Wear allowance on the sliding surfaces of cylin- der block and valve plate Check if there is no abnormal scratch, wear, score or seizure. Wear allowance: within 0.02 mm (0.0008 in) or less. W162-03-02-005 W3-2-36 Piston d D