UNDERCARRIAGE / Center Joint Installation CAUTION: Center joint weight: 52 kg (110 lb) IMPORTANT: Align the matching marks made when disassembling. 1. Install the spring washer to bolt (17) respectively. Install the center joint to the track frame with bolts (17) (4 used). Center Joint 9 17 16 10 : 24 mm Track Frame : 210 N m (21.5 kgf m, 154 Ibf ft) 2. Install hoses (9 to 16) to the lower side of center joint. 15 14 11 : 22 mm : 39 N m (4 kgf m, 29 Ibf ft) W16J-03-03-003 12 13 : 27 mm : 78 N m (8 kgf m, 58 Ibf ft) : 41 mm Machine Front 3. Install the spring washer to bolt (8). Insert the washer between stopper (7) and the spindle.
In- stall stopper (7) to the spindle with bolts (8) (2 used). : 205 N m (21 kgf m, 152 Ibf ft) Machine Front : 22 mm 7 8 1 2 : 140 N m (14 kgf m, 101 Ibf ft) 6 4. Install hoses (3, 4) to the spindle. : 27 mm : 93 N m (9.5 kgf m, 69 Ibf ft) : 19 mm : 29.5 N m (3 kgf m, 21.5 Ibf ft) 5 3 5. Install the adapters (4 used) to the upper side of spindle. Install hoses (1, 2, 5, 6). W16J-03-03-002 4 Spindle : 41 mm : 205 N m (21 kgf m, 152 Ibf ft) IMPORTANT: After completing the work, check the hydraulic oil level. Start the engine and check for any oil leaks. W3-3-2