hitachi — REMOVE AND INSTALL UPPER ROLLER

UNDERCARRIAGE / Upper and Lower Roller 3. Tighten valve (1) on the track adjuster. : 24 mm : 147 N m (15 kgf m, 108 lbf ft) 1 2 CAUTION: If track sag should be measured with the machine raised, support the jacked up machine firmly by using the wooden blocks. 4. Jack up the track to be measured. Apply grease via grease fitting (2) and adjust track tension. Track sag specification (A): 460 to 510 mm (18.1 to 20.1 in) NOTE: Before measuring track sag, clean the track frame and tracks and rotate the track by a half turn in reverse direction. W800-03-07-002 W800-03-06-001 W3-6-3