UNDERCARRIAGE / Upper and Lower Roller REMOVE AND INSTALL LOWER ROLLER Removal CAUTION: Track guard weight: 86 kg (190 Ib) 1. Remove the track guard. : 41 mm 2. Remove bolts (1) (4 used) from the lower roller. : 36 mm W105-03-06-008 3. Jack up the machine by using the front attach- ment and insert the wooden blocks under track frame (2). 90 ° to 110 ° W800-03-07-003 2 CAUTION: Grease pressure in the adjuster cylinder is high. Do not loosen valve (3) quickly or too much as valve (3) may fly off or high-pressure grease in the adjuster cyl- inder may gush out. Keep body parts and face away from valve (3) and loosen valve carefully. Do not loosen grease fitting (4). IMPORTANT:
It is enough to loosen valve (3) by 1 to 1.5 turns. Do not loosen valve (3) over that degree. 4. Loosen valve (3) on the track adjuster. Drain enough grease and permit the lower roller to be removed. W105-03-06-001 3 4 : 24 mm Grease Outlet W800-03-07-002 W3-6-4 1