FRONT ATTACHMENT / Front Attachment HYDRAULIC CIRCUIT PRESSURE RE- LEASE PROCEDURE NOTE: Operate the pilot pump by using the power from battery without starting the engine and deliver the pilot pressure to the spool of control valve. 1. Turn pilot shut-off lever (1) to the UNLOCK posi- tion. 2. Turn engine stop switch (2) ON. Control Lever NOTE: Perform steps 1, 2 and turn the key switch to the START position. Although the starter rotates, the engine does not start. IMPORTANT: Battery will deplete. Operate the key switch for short period. 3. Operate the lever in order to release any pressure in hydraulic circuit 4 to 5 times. 4. Turn pilot shut-off lever (1) to the LOCK position. 5.
Turn engine stop switch (2) OFF. 1 2 M1U1-01-029 W4-1-1