FRONT ATTACHMENT / Front Attachment REMOVE AND INSTALL ARM Removal 1. Remove the bucket. (Refer to Removal of Bucket on W4-1-2.) 2. Fully retract arm cylinder (1) and lower boom (2). Place the end of arm (3) onto the wooden block. 3. Release any pressure in the front attachment pipe and bleed air in the hydraulic oil tank. (Refer to W4-1-1, W1-4-1.) 4. Remove socket bolts (6) (8 used) from split flanges (7) (4 used). Remove hoses (5) (2 used) from bucket cylinder (4). Attach a plug onto the removed hose end and pipe end. Wooden Block W1J7-04-01-010 6, 7 4 5 : 14 mm 5. Remove lubrication hoses (8) (2 used) and (9) from arm (3) and arm cylinder (1).
Attach a plug onto the removed hose end and pipe end. : 19 mm, 22 mm 6, 7 W1J7-04-01-011 3 CAUTION: The arm (3) assembly weight: Standard 3.7 m arm: 4300 kg (9480 lb) H 3.7 m arm: 4510 kg (9940 lb) BE 2.9 m arm: 4650 kg (10250 lb) 6. Install the shackles (2 used) to the arm (3) as- sembly. Attach a wire rope onto the arm (3) as- sembly and hold the arm (3) assembly. Mounting Hole for Lifting Tool CAUTION: Arm cylinder (1) weight: 1200 kg (2645 lb) 7. Place the wooden block between boom (2) and arm cylinder (1), and hold arm cylinder (1). W1J7-04-01-012 Wooden Block 1 2 W1JB-04-02-012 W4-1-6 1 2 3 8 9 8 3 1 W1 8 1 3 W1 3