hitachi — REMOVE AND INSTALL BUCKET

FRONT ATTACHMENT / Front Attachment CAUTION: Metal fragments may fly off when a hammer is used. Wear necessary protection, such as goggles, hard hats, etc in order to prevent personal injury. Arm CAUTION: Pin (3) weight: 82 kg (180 Ib) 6. Attach a nylon sling onto the body of pin (3) and hoist pin (3). Install pin (3). Install stopper (4) to pin (3) with bolts (5) (3 used). : 30 mm : 400 N m (40 kgf m, 295 lbf ft) IMPORTANT: Install split type O-ring (1) so that the split part does not contact sand in order to reduce the damage of split type O-ring (1). 7. Install split type O-rings (1) (4 used) to the bucket. W1J7-04-01-022 : 8 mm NOTE:

After installing O-ring (1), cut the bolt out of nut (2) to 10 to 20 mm (0.4 to 0.8 in) in or- der not to damage O-ring (1). 8. Apply grease to the grease fitting at bucket con- necting side in the arm and link A. M1J1-07-074 Grease Fitting W1J7-04-01-021 W4-1-5 5 4 Bucke Bu 2 2 Split Part 2 t Here 1 1 ng 3