FRONT ATTACHMENT / Front Attachment 10. Install lubrication hose (1) to the boom cylinder rod side. 1 : 19 mm : 30 N m (3.0 kgf m, 22 lbf ft) 11. Connect the plug of boom light. 12. Apply grease to the boom foot part and the boom cylinder rod side by using a grease gun. As for the machine equipped with the auto lubri- cation device (optional), turn the auto lubrication switch ON 13. Install the arm. (Refer to Installation of Arm on W4-1-9.) 14. Install the bucket. (Refer to Installation of Bucket on W4-1-4.) 15. After completing the work, add hydraulic oil to the specified level. Operate every cylinder fully to the stroke end several times and release the pressure in the circuit.
Check for any oil leaks of each hose. W1JB-04-02-007 Boom Cylinder W4-1-17 Boom Cylin- der Rod Side W1J7-04-01-004 Boom Foot Side