FRONT ATTACHMENT / Cylinder Installation CAUTION: Bucket cylinder (2) weight: 680 kg (1500 lb) 1. Hoist bucket cylinder (2). Align the pin hole on bucket cylinder (2) bottom side with that on arm (10). CAUTION: Bucket cylinder (2) weight: 680 kg (1500 lb) 4. Hoist bucket cylinder (2). Remove the wire to secure the cylinder rod. Start the engine. Extend the cylinder rod. Align the pin hole on bucket cylinder (2) rod side with that on link A (1) and link B (3). CAUTION: Pin (11) weight: 34 kg (75 lb) 2. Hoist pin (11). Insert pin (11) into the hole on bucket cylinder (2) bottom side. Install pin (11) to arm (10) with plate (13), spring washers (14) (2 used) and bolts (15) (2 used). CAUTION:
Pin (4) weight: 94 kg (210 lb) 5. Hoist pin (4). Insert pin (4) into the pin hole on cylinder rod side. Install stopper (5), spring washers (6) (3 used) and bolts (7) (3 used) to pin (4). : 30 mm : 390 N m (40 kgf m, 290 lbf ft) 3. Install hoses (12) (2 used) to the bottom side of bucket cylinder (2) with socket bolts (8) (8 used) and split flanges (9) (4 used). Install the lubrication hose. : 30 mm : 390 N m (40 kgf m, 290 lbf ft) 6. Remove the wire to secure links B (3) (2 used) in order not to drop. Start the engine. Remove the wooden block set under link A (1). IMPORTANT:
After all work is completed, operate the bucket cylinder to the stroke end several times and release the pressure in the circuit. (Refer to W4-2-14.) : 12 mm : 175 N m (18 kgf m, 130 lbf ft) : 19 mm : 29.5 N m (3 kgf m, 21.5 lbf ft) W4-2-13