Toyota — TRANSFORMER ASSY

2-13 Inspection: Measure the diode continuity. Inspect the diodes installed on the radiating fin plate and remove only if an abnormality is found. Reassembly: As two diodes with different polarity are used, be sure to avoid incorrect installation. Reassembly: Install each diode by tightening to the specified torque. SKR71/02, SKN71/02: 4 N·m (41 kgf·cm) [3 ft·lbf] SKR100/04, SKN100/04: 10 N·m (102 kgf·cm) [7 ft·lbf] Tester range Ω × 1K Measurement terminals Forward Anode (-) − Cathode (+) Reverse Anode (+) − Cathode (-) Standard: Forward Continuity Reverse ∞ Ω