2-19 Error Code F7: Charging start failure Inspection 1 Connection check Connection defect NG OK Is the transformer operating sound heard upon charging switch on? NG (Not heard) OK (Heard) Inspection 2 Transfromer fuse check (See page P2-12.) Check compatibility between battery capacity upon charging switch on?
(See page 2-2.) NG ( ҐW ) NG Fuse (Fch) open OK(0 W ) OK Incompatible Inspection 3 Transformer primay voltage check Inspection 5 Tap changer check (See page 2-6.) NG OK OK NG Tap adjustment defect Transformer defect Transformer defect Inspection 4 Magnetic switch (MSch) voltage check OK NG MSch defect NG Inspection 6 Charging button check Switch box defect OK Display defect INSPECTION 1. Connection check (1) Check that the P1 and N1 terminals of the transformer and controller are connected correctly without any looseness. (2) Check that CN60, CN66 and CN61 are connected correctly. (3) Check that the AC and DC plugs are free from contact defect.
(No roughness of the terminal or heating during power conduction.) (4) Check that the power cable is not damaged. OK Transformer operating sound check Not OK Connection defect INSPECTION 2. Transformer fuse (Fch) inspection (See page2-12.) OK (0 Ω ) To inspection 3 NG ( Ω ) Open fuse (Fch)