Toyota — GS

2-36 DISASSEMBLY INSPECTION REASSEMBLY Disassembly Procedure 1 Remove the charger cover. 2 Perform inspections before disassembly. [Point 1] 3 Remove the magnetic switch ASSY (MSch). [Point 2] 4 Remove the timer ASSY (AMT). 5 Remove the resistor (R1·R2). 6 Remove the fuse (Fch). [Point 3] 7 Remove the diode (Dch). [Point 4] 8 Remove the transformer (TF). Note: Put a tag indicating the connecting position at the time of disassembly to prevent incorrect connection at the time of reassembly. Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure.