Doosan D80S-5 — Doosan D80S-5 User Manual

Operation Section Auto Shift Controller ASC-200/201 (If Equipped) Product Description The Autoshift controller is an electrical control system, specially designed for use on forklift trucks with internal combustion engines. Its primary purpose is to prevent the operator from operating the truck outside of the design parameters, e.g. selecting the reverse gear when travelling in excess of 5 km/h (3.11 mph) in a forward direction, and vice versa. The Autoshift controller is mounted on a convenient position away from excessive heat sources and retrofits into the truck's electrical system.

An inductive speed sensor is mounted on the transmission case where it will pick up a pulse from a gear tooth pattern. This pulse is used to monitor the truck in motion and its travel speed. To enable the system to change gears smoothly, the shift points for offset speed are adjustable. An operator no longer has to change gears with his hands, therefore he can be more productive. The Autoshift controller prevents strain and abuse to the transmission by changing gears up and down automatically. It also prevents damage to the half shaft, excessive tire wear and heat to the transmission.

Features Adjustments Adjustment Switch • Low-High Shift Point (SW1) ASC-200/201 allows you to set the 2 speed Auto Gear Shift Point, the maximum travel speed at which the Auto Shift Controller up-shift or down-shift the transmission automatically according to the vehicle speed. For adjustment of 2 speed Auto Gear Shift speed, the SW1 switch is used on the printed circuit board. 1) 2 - speed auto shift control 2) Prevent downshifting at high speed 3) Inhibit selecting direction at high speed outside of the design parameters. For example if SW1 is put 5 th notch, the 2 speed auto gear shift speed will be 5.0km/h(3.11mph) in ASC-200 or 6.17km/h(3.84mph) in ASC-201.

The factory setting value as a default for SW1 of each model is as follows. 107 SW1(Low-High SHIFT) Tow Speed Auto Gear Shift Point Notch Vehicle Speed ASC-200 ASC-201 0 2.5km/h(1.55mph) 5.57km/h(3.46mph) 1 3.0km/h(1.86mph) 2 3.5km/h(2.17mph) 3 4.0km/h(2.49mph) 4 4.5km/h(2.80mph) 5 5.0km/h(3.11mph) 6.17km/h(3.84mph) 6 5.5km/h(3.42mph) 6.78km/h(4.21mph) 7 6.0km/h(3.73mph) 7.29km/h(4.53mph) 8 6.5km/h(4.04mph) 7.89km/h(4.90mph) 9 7.0km/h(4.35mph) 8.40km/h(5.22mph) Product Adaptable To ASC-200 D50/60/70S-5 (2 Speed) ASC-201 G50/60/70S-5 Product Notch Vehicle Speed ASC-200 5 5.0km/h (3.11mph) ASC-201 6 6.78km/h (4.21mph)