Doosan D80S-5 — Doosan D80S-5 User Manual

Operation Section Operating Techniques Lifting the Load Inching into Loads 1. Lift the load carefully and tilt the mast back a short distance. Typical Example Typical Example 1. Move the lift truck slowly FORWARD into position and engage the load. The truck should be square with load, forks spaced evenly between pallet stringers and as far apart as load permits. 2. Tilt the mast further back to cradle the load Typical Example Typical Example 3. Operate the lift truck in reverse until the load is clear of the other material. 4. Lower the cradled load to the travel position. NOTE: Lift and tilt speeds are controlled by engine rpm. 2.

Move the lift truck FORWARD until the load touches the carriage. 112