Operation Section Traveling with the Load Unloading Travel with the load as low as possible, while still maintaining ground clearance. NOTICE Typical Example 1. Move the lift truck into the unloading position. Typical Example 1. Carry the load as low as possible but maintain clearance. 2. On grades, always travel with the load on the UPHILL side, as shown above. Typical Example 2. Tilt the mast FORWARD only when directly over the unloading area. Do not tilt the mast forward with the load unless directly over the unloading area, even if the power is off. Typical Example 3. For better vision, travel in reverse with bulky loads. 113 WARNING