Doosan D80S-5 — Doosan D80S-5 User Manual

Maintenance Section Fuel Specifications General Fuel Information Use only fuel as recommended in this section. Fill the fuel tank at the end of each day of operation to drive out moisture laden air and to prevent condensation. Maintain a constant level near the top of the day tank to avoid drawing moisture into the tank as the level decreases. Do not fill the tank to the top. Fuel expands as it gets warm and can overflow. Do not fill the fuel filters with fuel before installing them. Contaminated fuel will cause accelerated wear to the fuel system parts. NOTICE Drain the water and sediment from main fuel storage tank before it is refilled.

This will help prevent water and/or sediment from being pumped from the fuel storage tank into the engine fuel tank. Diesel Specifications Fuel Types *As delivered to fuel system Fuel Sulfur Content DOOSAN Diesel Engines have the ability to burn a wide variety of fuels. These fuels are divided into two general groups, preferred and permissible. The Preferred Fuels provide maximum engine service life and performance. They are distillate fuels. They are commonly called diesel fuel, MDO diesel, furnace oil, gas oil or kerosene (for cold weather operation).

Experience has proven that distillate fuels meeting the following basic specifications will result in optimum engine performance and durability. DOOSAN strongly encourages the use of fuels that meet the Preferred Fuels specification. The permissible fuels are crude oils or blended fuels. Use of these fuels can result in higher maintenance costs and reduced engine service life. Crude oil is used to describe oils/fuels that are not refined and are in the original state as when pumped from the ground. Certain types of crude oils can be burned in DOOSAN Engines. The percentage of sulfur in the fuel will affect the engine oil recommendations.

Fuel sulfur is chemically changed during combustion to form both sulfurous and sulfuric acid. These acids chemically attack metal surfaces and cause corrosive wear. Certain additives used in lubricating oils contain alkaline compounds that are formulated to neutralize these acids. The measure of this reserve alkalinity in lubricating oil is known as its Total Base Number (TBN). TBN is essential to neutralize the acids from combustion gases and to minimize corrosive wear. 130 PREFERRED DISTILLATE FUEL FOR DIESEL ENGINES Specifications Requirements* Aromatics (AST D1319) 35% Max. Ash (ASTM D482) 0.02% Weight Max. Cetane Number (ASTM D613) 35 Min. for 45 Max. 40 Min.

for Dl Engines Cloud Point (ASTM D97) Not Above Lowest Expected Ambient Temperature Gravity API (ASTM D287) 30 Min. and 45 Max. Pour Point (ASTM D97) 6 C (10 F) Below Ambient Min. Sulfur (ASTM D2788, D3605 or D1552) 0.5 Max. (See Sulfur Topic) Viscosity, Kinematic @ 38°C (100°F)(ASTM D445) 20.0 cSt Max. 1.4 cSt Min. Water & Sediment (ASTM D1796) 0.01% Max.