OPERATION OPERATION WARMING UP OPERATIONS NOTICE The most suitable temperature for the hydraulic oil is 50 - 80єC (122єF - 176єF), but in order to extend the life of the machine, the temperature must be raised to at least 20єC (68єF) before starting work. Do not suddenly operate the levers when the hydraulic oil temperature is below 20єC (68єF). Do not suddenly accelerate the engine before the warming-up operation is completed. In particular, if the engine is suddenly accelerated in cold weather, white smoke may be emitted, but this does not indicate any abnormality. Do not run the engine at low idling or high idling continuously for more than 20 minutes.
If it is necessary to run the engine at idling, apply a load from time to time or run the engine at a mid- range speed. After starting the engine, do not immediately start operations. First, carry out the following operations and checks. 1. Pull fuel control lever(1) to the center position between LOW IDLING and HIGH IDLING and run the engine at medium speed for about 5 minutes with no load. 2. Set safety lock lever (2) to the FREE position, then lower the body. (When the body is raised) 3-51