Komatsu — SWINGING

OPERATION OPERATION SWINGING WARNING The tail of the machine extends outside the tracks. Before operating the swing, check that the area around the machine is safe. Check that swing lock monitor (2) goes out. If the swing control lever is operated quickly, the upper structure will swing quickly; and if it is operated slowly, the upper structure will swing slowly. 1. Before operating the swing, set swing lock switch (1) to the OFF (release) position. 2. Operate the swing control lever (3). The movement of the swing is as shown in the diagram on the right. If the lever is released, it will return to the neutral position, and the upper structure will stop and be held in the same position.

REMARK The swing indicator lamp (both left and right) will flash during the swing operation. 3-60