Komatsu — OPERATING DUMP BODY

OPERATION OPERATION 3. When not operating the swing, set swing lock switch (1) to the ON position to prevent the upper structure from swinging if swing control lever (3) is operated by mistake. OPERATING DUMP BODY WARNING Stop the machine in the correct position, check that there is no one behind the machine and that there is no obstacle, then starting the dump operation. If necessary, position a flagman or set blocks to stop the machine. Before operating the dump, sound the horn to give a warning to people standing in the surrounding area. If the dump is operated on a slope, there is danger of the machine tipping over. If you feel that there is any danger, lower the body immediately. 1.

Before operating the body, set the pedal lock to the FREE position. 2. The body is operated with the control pedal. The relationship between the pedal and the movement of the body is as shown in the diagram on the right. When the pedal is released, it will return to the center position and the body will be held in its present position. 3-61