Komatsu — PRECAUTIONS FOR OPERATION

OPERATION OPERATION PRECAUTIONS FOR OPERATION PRECAUTIONS WHEN TRAVELING Traveling over boulders, tree stumps, or other obstacles sub- jects the machine (particularly the undercarriage) to a large impact, and will cause damage, so avoid the obstacle or remove it, or take other steps to avoid traveling over it. If the machine has to travel over such an obstacle, reduce the travel speed, keep the dump body fully lowered, and try to ensure that the center of the track travels over the obstacle. PRECAUTIONS WHEN TRAVELING AT HIGH SPEED When traveling over uneven bedrock or in places where there are many boulders, switch to LOW speed and travel slowly.

PERMISSIBLE WATER DEPTH CAUTION Set the travel lever to the neutral position before using the brake switch. NOTICE When driving the machine out of water, if the angle of the machine exceeds 15є, the rear of the upper structure will go under water, and water will be thrown up by the radiator fan. This may cause the fan to break. Be extremely careful when driving the machine out of water. Do not drive the machine in water deepen than of the center of carrier roller (1). Supply grease to the parts which have been under water for a long time until the used grease is projected out of the bearings (around the bucket pin, in particular). 3-63