Komatsu — LIFTING MACHINE

TRANSPORTATION OPERATION LIFTING MACHINE WARNING Do not lift the machine with any worker on it. Use wire ropes having sufficient strength for the weight of this machine. Lift the machine in only the position shown below. If it is lifted in another position, it may be unbal- anced. Do not raise the machine with the upper structure swung to the side. Set the upper structure parallel to the undercarriage before lifting. Lift the machine horizontally. NOTICE The lifting procedure applies to machines with standard specifications. The method of lifting differs according to the attachments and options actually installed. In such cases, please contact your Komatsu distributor for information.

For details of the weight, see "SPECIFICATIONS (PAGE 5-2)". 1. Stop the engine and confirm that there is nothing around the operator’s seat, then get off the machine. 2. Pass the wire rope between the 1st and 2nd track rollers from the front and the 1st and 2nd track rollers from the rear. 3. Set the lifting angle of the wire rope to 30 - 40є, then lift the machine slowly. 4. After the machine leaves the ground, stop lifting once. After the machine is stabilized, lift it up slowly. 3-78