OPERATION COLD WEATHER OPERATION COLD WEATHER OPERATION PRECAUTIONS FOR LOW TEMPERATURE If the temperature becomes low, it becomes difficult to start the engine, and the coolant may freeze, so do as fol- lows. FUEL AND LUBRACANTS Change to oil with low viscosity for all components. For details of the specified viscosity, see "RECOM- MENDED FUEL, COOLANT, AND LUBRICANT (PAGE 4-11)". If the hydraulic oil temperature is low, the viscosity of the oil will increase, and it will be more difficult for the oil to flow inside the hydraulic circuit. In this condition, if the control levers are operated, it will take time for the work equipment to start moving.
To prevent this problem, warm up the machine thoroughly to raise the hydraulic oil temperature, then start operations. COOLANT WARNING Antifreeze is toxic. Be careful not to get it into your eyes or on your skin. If it should get into your eyes or on your skin, wash it off with large quantities of fresh water and see a doctor at once. Antifreeze is toxic. Be extremely careful when handling it. When replacing coolant containing anti- freeze or when handling coolant when repairing the radiator, contact your Komatsu distributor or ask your local antifreeze dealer. Be careful not to let the water flow into drainage ditches or spray on to the ground surface.
Antifreeze is flammable, so do not bring any flame close. Do not smoke when handling antifreeze. NOTICE Please use Komatsu genuine supercoolant (AF-NAC) for the coolant. As a basic rule, we do not recom- mend the use of any coolant other than Komatsu genuine supercoolant. For details of the antifreeze mixture when changing the coolant, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-23)". 3-79