OPERATION TROUBLESHOOTING TROUBLESHOOTING AFTER RUNNING OUT OF FUEL When starting after running out of fuel, fill with fuel and bleed the air from the fuel system before starting. For details of bleeding the air, see "REPLACE FUEL FILTER CARTRIDGE (PAGE 4-40)". TOWING THE MACHINE Be sure to use a wire rope sufficiently strong for the towing weight. WARNING Do not apply a sudden load to the wire rope. If the machine sinks in mud and cannot get out under its own power, or if the drawbar pull of the excavator is being used to tow a heavy object, use a wire rope as shown in the diagram on the right. Place piece of wood between wire ropes and body to prevent damage to ropes and body.
At this time, never use the hook for light-weight towing. LIGHT-WEIGHT TOWING HOOK WARNING The shackle must always be used. Hold the rope level and direct it straight to the track frame. Move the machine slowly in the Lo mode. The track frame has been equipped with a hook to pass the shackle for towing light objects. (Except machines with blade specification) 3-83