Komatsu — CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT

SERVICE PROCEDURE MAINTENANCE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING If inspection, cleaning, or maintenance is carried out with the engine running, dirt will get into the engine and the engine will suffer damage. Always stop the engine before carrying out these opera- tions. When using compressed air, there is danger that dirt may be blown around and cause serious injury. Always use safety glasses, dust mask, and other protective equipment. CHECKING If dust indicator (1) is red, clean the air cleaner element. NOTICE Do not clean the air cleaner element before the dust indi- cator becomes red.

If the element is cleaned frequently before the dust indicator becomes red, the performance of the air cleaner is not used perfectly and the cleaning effect is lowered. In addition, dust sticking to the element falls into the inner element each time the element is cleaned. CLEANING OR REPLACING OUTER ELEMENT 1. Open the right window of the operator's compartment, remove wing nut (2), then take out element (3). 2. Clean the inside of the air cleaner body. 4-20