Komatsu — CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT

SERVICE PROCEDURE MAINTENANCE REPLACING INNER ELEMENT 1. First remove wing nut (2) and the outer element, and then remove the inner element. 2. To prevent dust from getting in, use a clean cloth or tape to cover the air connector (outlet side). 3. Clean the air cleaner body interior, then remove the cover installed in Step 2. 4. Fit a new inner element to the connector and tighten it with nuts. (Tightening torque: 4.9 to 5.88 N•m(0.5 to 0.6 kgf•m, 3.6 to 4.3 lbft)) NOTICE The inner element must not be cleaned and used again. When replacing the outer element, replace the inner element at the same time. 5. Set the outer element in position and secure it with the wing nut. 6.

After replacing the element, press the button of dust indicator to return the red piston to its original position. 4-22