Komatsu — REPLACE RUBBER SHOES

SERVICE PROCEDURE MAINTENANCE ADJUSTMENT WARNING Grease inside the adjusting mechanism is under high pressure. Grease coming from grease drain plug (1) under pressure can penetrate the body causing injury or death. For this reason, do not loosen grease drain plug (1) more than one turn. Do not loosen any part other than grease drain plug (1). If the track tension is not relieved by this procedure, please contact your Komatsu distributor. WHEN INCREASING TENSION Prepare a grease gun 1. Pump in grease through grease drain plug (1) with a grease gun. 2. To check that the correct tension has been achieved, move the machine backwards and forwards. 3.

Check the track tension again, and if the tension is not correct, adjust it again. 4. If the tension is still low after supplied grease, the rubber shoe needs to be replaced or the seal in the cylinder needs to be replaced. Ask your Komatsu distributor for replacement. WHEN LOOSENING TENSION WARNING It is extremely dangerous to release the grease by any method except the procedure given below. If the track tension is not relieved by this procedure, please contact your Komatsu distributor. 1. Loosen grease drain plug (1) gradually to release the grease. 2. Turn grease drain plug (1) a maximum of one turn. 3.

If the grease does not come out smoothly, move the machine backwards and forwards a short distance. 4. Tighten grease drain plug (1). 5. To check that the correct tension has been achieved, move the machine backwards and forwards. 6. Check the track tension again, and if the tension is not correct, adjust it again. REPLACE RUBBER SHOES Ask your Komatsu distributor to replace rubber shoes. 4-28