. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Hydraulic Tank, Add Oil WARNING stopped, and may cause burns. Wait 3 - 59 REMARK If breather hole (5) on the cap is clogged, the p ressure in the tank will drop and fuel will Clean the hole from ti T he parts and oil ar e at high temperature t emperature to go do wn before starting the work. When removing the o il filler cap, turn it slowly to release th e internal pressure, for the 1.
When checking th e oil level in t he hydrauli c tank, s et the machine in the following con When carryin g out inspection in the c ondition shown in diagram A on the right, star t the e ngine , run the engine at low speed, lo wer the blade to the ground, retra ct the arm and bucket cy linders, lower the b oom to b ring the bucket teeth into con tact with the g round , then stop the engine When carryin g out inspection in the c ondition shown in diagram B on the right, star t the e ngine , run the engine at low speed, lo wer the blade to the ground, exte nd the arm and bucket c ylinders, rais e the boom to the maximum . he boom maximum height, then s top the engine