Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS engine hood and check that the red piston is not has appeared, clean or replace the element of the method of cleaning the element, see "CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT (PAGE 4-17)". 1. Open the inspection cover (1). CLOSED 3 - 61 Check Dust Indi 1. Open the e showing in If the red pi immediately For details "CHECK, C 3. After checki ng, cleaning, or repl acing the air cleaner element, press the kn ob of dust indicator ( 1) to return th e red piston t o its original posi tion. Check Water Se parator If red ring (5) of water separator is at the bottom o f elemen t cup (4), there is no wate r.

If red ring (5) is f loating, there is wate r up to the b ottom of the ring, s o drain the wat er as follows. Prepare the f ilter wrench for wate 2. Set handle position (a). 3. Using the fil cup (4) and throw out the water i 4. Fill element tighten ring 5. Set handle ( 2) to the OPEN posi 6. rain any wa ter or sediment fro m fuel tank. "DRAIN WA TER FROM FUEL T ANK (PAGE 4-52)". filter holder, then details, see