Komatsu — DISCHARGED BATTERY

. OPERATION TROUBLES AND ACTIONS Starting the Engine WARNING 3 - 126 NOTICE d clip should be suitable for the battery size. The size of the booster cable an d clip should be suitable for the battery s The battery of the normal machi ne must be the same capacity as that of the engine to be sta The starting system for this mac hine uses 24 V. For the normal machine, also use a 24 V bat Check the cables and clips for d amage or corrosion. lips are firmly connected. Make sure that the cables and c Check that the safety lock lever s and parking brake levers of both machines are in the LOCK Check that each lever is in the N EUTRAL position.

Booster Cable Connection Keep the starting switch of t machine in the OFF position. he normal machine and problem Connect the booster cable as f ollows, in the order of the numbers marked in the diagram. 1. Connect one clip of boos terminal of the problem ma 2. Connect the other clip of b terminal of the normal mac 3. Connect one clip of boos terminal of the normal mac 4. Connect the other clip of frame of the problem mach ter cable (A) to the positive (+) chine. ooster cable (A) to the positive (+) hine. ter cable (B) to the negative (-) hine. booster cable (B) to the revolving ine. 1. 2. 3. 4. 1. terminal of the problem ma 2. Connect the other clip of b terminal of the normal mac 3.

Connect one clip of boos terminal of the normal mac 4. Connect the other clip of frame of the problem mach Always check that the safety lock le ver is set to the LOCK position, regardles s of whether the ma chine is working normall y or has failed. Check also that all the cont rol levers are in the HOLD or neutral position. 1. Make sure the clips are firm ly connected to the battery terminal 2. Start engine of the normal 3. Turn the starting switch of t he problem machine to the START position and start If the engine doesn't start a t first, try again after 2 minutes or so . Booster Cable Disconnection After the engine has started, disconnect booster cables in the re connected.

reverse order in which they we 1. 2. 3. 4. 1. Remove one clip of booster cable (B) from the revolving frame of the problem machine. 2. Remove the other clip of bo oster cable (B) from the negative (-) terminal of the normal mac hine. er cable (A) from the positive (+) hine. 3. Remove one clip of boost terminal of the normal mac 4. Remove the other clip of bo oster cable (A) from the positive (+) terminal of the problem ma chine.