. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 54 EVERY 250 HOURS MAINTENANC Maintenanc e for every 50 hours servic e should be c arried ou t at the same The oi l is a t high tempera ture immediate ly aft er the ma chine has been operated. Wait fo r the o il to cool down before s tarting the op eration. If ther e is s till pressure re maining inside the c ase, the o il or plug may fly out. Loose n the plug slowly t o release the pr essur Prepare a container to catch draine Prepare a hexagon wr 1. Tur n the sprocket so that plug (P) may come to the bottom. 2. Set the container to c atch oil unde r plug (P). 3.
Remove plug (G) with a hexagonal wrench. Oil l evel shouldbe nea r the bottom of th e plug hole (G 4. If th e oil level is low, use a hexagonal w rench t o remove plug (F), then add oil throu gh the hole o f plu g (F). A dd oil unti l the oil o verflows from the hole in plug (G). 5. Afte r checking the oil level, install plugs (F) and