. MAINTENANCE MAINTENANCE PROCEDURE no display of the UPPER fail. 4 - 56 When it is Impossible to Check Electrolyte Level from Side of Battery If it is impossible to check the electrolyte lev LEVEL line on the s ide of the battery, check Open the engin e hood and lock it securel y with the hood support (See "ENGINE HOOD (PAGE 3-32)".) Open the batter y inspection cover and lo ck it in position securely with the cover supp (See "BATTER Y INSPECTION COVER (PAGE 3-34)".) Remove the se at installed on top of the b Remove cap (1) at the top of the battery, lo ok through the water filler port, and c heck the electrolyte surfa ce.
If the electrolyte does not reach the sleeve, add distilled w ater so that the leve reaches the bot tom of the sleeve (UPPER LEVEL line) wi thou Us e the diagram be low for reference, and ch eck if the electrolyte reaches the bottom of t After adding dis tilled water, tighten cap (1 REMARK If distilled water is a dded to above the bottom of the sleeve, use a syringe to lower the level to the bottom of the If d sleeve. Neutralize t he removed fluid with baki ng soda (sodiu m bicarbonate), then flush it away with a large amount of water or consult your Komatsu distributor or battery make r.
When it is Possible to Use Indicator to Check Electrolyte Leve l If it is possible to us e and indicator to check t he electrolyte l evel, follow the instructions g