. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN SWING MACHINERY CASE WARNING under the drain underside to drain oil, · m (4.5 to 9.5 4 - 71 The parts and oil are at high temperature after th e engine is stopped, and may cau se serious burns. Wait for the temperature to go d own before startin R efill capacity: 2.0 1. plug (P) at the b ottom of the machine. Loosen drain plu g (P) on the machine and tighten it ag Tightening torqu Kgf·m, 32.5 to 68 3. Add the replace ment amount of oil through the in sertion guide for dipstick (G). e dipstick (G) with cloth. ck (G) into filler pipe (F), then remove it. 4. Wipe off oil on th e dipstick (G) with clot 5.
Fully insert dipsti ck (G) into filler pipe ( F), then re move i 6. The oil on the oil l evel gauge (G) should be betwee n the H mark and L mark. If the oil is below the L mark, add oil through the d ipstick guide. 7. If the oil is abov e the H mark, drai n the excess oil from drain plug (P), then ch eck the oil level again.