. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF PARKING BRAKE WARNING NOTICE CHECK WEAR OF PARKING BRAKE PADS WARNING 4 - 53 If the machine moves, it will lead to serio us injury or death. If machine begins to move during the in spection of braking ca pacity, lowe r the engi ne speed i mmediately, set gear shift lever at N position, and then depress the foot b Check the br aking capacity of the pa rking brake as f ollows Stop the 1) to PA Set shift machine RKING. lever (2) on flat ground and set parking brake switch to the D position, gradually raise the engine speed.
I speed re Lower th f the machine does not aches 1400 rpm, it is no e engine speed, set ge move even when the engine rmal. ar shift lever at N position. If any prob lem is found, ask your K omatsu distributo r for repair. Ther e is dange r of damage inside the tran smission, so always do t his with the gear shift lever at the "D" position. Do not u se any other position. Neve r put any oil or grease on the surfac e of the pad or disc. Measure the thicknes s of the pad, an d if it is less than 1. 5 m m (0.06 in), c ontact y our Komatsu distributor