. MAINTENANCE SERVICE PROCEDURE CHECK FAN BELT TENSION, ADJUST TESTING ADJUSTING 4 - 60 The deflectio o 0.75 in) whe n a point midway bet ween the fan pull ey and tension pulle y is pressed with the thumb w ith a force of 98 1. Loosen n 2. Use adju stment bolt ( 2) to move pulley (3) so that the deflection s approx . 17 to 19 m m (0.67 to 0.75 i n) when a point midway between the fan pulle y and tension pu with the humb wi th a force of 98 N (10 kg). placed with a n When th e belt is re deflectio n is 13 to 15 mm (0.51 to 0.59 3. Check fo r damage to the pulleys, and wear of the groove a nd belt. Be particularly careful to check not ontact w ith the botto m of the groove.
f the belt is stretched and there is no al lowance for adjustment, or it is cu t or cracked, replace it with a